T-Shirt Plant Hanger // DIY

T-Shirt Plant Hanger // DIY

This is a really simple DIY project for any crafter - all you need to be able to do is tie knots! Have fun with it!

________________________________

1. Gather your supplies. Larger sized tees always work best... but anything will work.

2. Cut along the edges of the tee.

3. Cut off the sleeves.

4. Cut along the top shoulder seam.

5. Cut off the upper third of the tee - from one armpit seam to the next. (Set aside all extra fabric for future projects!)

6. Fold your piece of fabric in half and cut- now you have two pieces.

7. Fold your two pieces in half again and cut. Now you have four pieces.

8. Repeat again - now have eight pieces (strips) of fabric. Pull tightly on the ends of the fabric to stretch it out. The fabric will start to curl on the edges - that's ok!

9. Line up the bottom edges of your strips and tie into one big knot.

10. Gathering two strips at a time, tie them into a knot about 2 inches above your base knot. Repeat until you have four knots.

11. Now, splitting apart the strips you just knotted together, tie four new knots, connecting one strip from one knot to another strip from another knot. (see Step 13 for a better photo)

12. If you want to get fancy with the remaining strips like we did, twist the fabric around itself (for about 5 inches) and knot off at the top.

13. Admire your handy work!

Add your flower pot into the center - pot a flower or plant - hang on your deck or in your bedroom - and enjoy!

 

 

 


Older Post Newer Post